For many years there seemed to be a particular efficient method to keep data on your computer – utilizing a hard disk drive (HDD). Then again, this type of technology is actually expressing it’s age – hard disk drives are really noisy and slow; they are power–hungry and are likely to create lots of warmth in the course of serious procedures.

SSD drives, on the contrary, are really fast, consume way less power and are much cooler. They furnish an innovative method to file access and storage and are years in advance of HDDs with regards to file read/write speed, I/O efficiency as well as energy capability. Find out how HDDs fare up against the modern SSD drives.

1. Access Time

Image

With the release of SSD drives, data access rates are now through the roof. Due to the brand–new electronic interfaces used in SSD drives, the standard data file access time has been reduced to a record low of 0.1millisecond.

Image

HDD drives even now makes use of the exact same fundamental data access technology which was actually developed in the 1950s. Despite the fact that it has been much enhanced consequently, it’s slower compared with what SSDs will offer. HDD drives’ data access speed varies somewhere between 5 and 8 milliseconds.

2. Random I/O Performance

Image

Due to the same revolutionary solution which allows for better access times, you too can get pleasure from greater I/O effectiveness with SSD drives. They can complete twice as many functions within a given time as compared with an HDD drive.

An SSD can deal with at least 6000 IO’s per second.

Image

All through the exact same trials, the HDD drives proved to be considerably slower, with only 400 IO operations managed per second. Although this looks like a significant number, for those who have a busy web server that hosts loads of well–liked websites, a slow disk drive can lead to slow–loading sites.

3. Reliability

Image

SSD drives are made to include as fewer rotating components as is feasible. They utilize a similar technique like the one employed in flash drives and are also much more dependable in comparison to common HDD drives.

SSDs come with an normal failing rate of 0.5%.

Image

Since we have previously documented, HDD drives make use of rotating disks. And anything that works by using a large number of moving components for prolonged intervals is more likely to failure.

HDD drives’ normal rate of failure varies somewhere between 2% and 5%.

4. Energy Conservation

Image

SSD drives work practically noiselessly; they don’t create excessive warmth; they don’t demand supplemental chilling alternatives and then use up much less power.

Tests have shown that the common electrical power consumption of an SSD drive is somewhere between 2 and 5 watts.

Image

HDD drives are infamous for getting noisy; they’re more prone to heating up and when there are several disk drives in one web server, you’ll want a further a / c device just for them.

As a whole, HDDs consume somewhere between 6 and 15 watts.

5. CPU Power

Image

SSD drives permit a lot quicker file accessibility rates, which generally, in return, encourage the CPU to finish data queries much faster and then to go back to other tasks.

The common I/O wait for SSD drives is actually 1%.

Image

When compared to SSDs, HDDs allow for slower file access rates. The CPU will need to lose time waiting for the HDD to return the demanded data, reserving its assets meanwhile.

The common I/O delay for HDD drives is approximately 7%.

6.Input/Output Request Times

Image

It’s about time for several real–world illustrations. We, at NETDOGGY, ran a complete system backup with a hosting server using only SSDs for data storage reasons. During that process, the typical service time for an I/O demand stayed below 20 ms.

Image

During the exact same tests sticking with the same hosting server, now equipped out with HDDs, general performance was noticeably sluggish. Throughout the web server backup process, the common service time for I/O calls varied between 400 and 500 ms.

7. Backup Rates

Image

One more real–life enhancement is the rate with which the back up is produced. With SSDs, a hosting server backup now requires only 6 hours using NETDOGGY’s hosting server–enhanced software.

Image

Alternatively, on a server with HDD drives, an identical data backup can take three to four times as long to finish. A full back–up of an HDD–driven web server may take 20 to 24 hours.

The Linux VPS web hosting and also our regular Linux cloud website hosting services accounts feature SSD drives automatically. Join our family here, at NETDOGGY, and discover how we may help you transform your site.

  • Service guarantees

  •  
  • All of our Virtual Private Servers come with no setup fees and operate in a stable network providing 99.9% of uptime. Full root server access warranted.

  • Compare our prices

  •  
  • Take a look at our price list and select the best Virtual Private Server for your dynamic websites. You’ll be able to upgrade to a more feature–rich VPS Web Hosting setup with only a click of the mouse.
  • Compare our hosting plans

  • Contact Us

  •  
  • You can easily get in contact with us 24x7 by email or by using our really–fast ticketing platform. NETDOGGY provides a 1–hour response time frame warranty.